MCS, Media Center control System, integrates multimedia devices and environment control devices into a
digital unit and control by a sensor panel.
You can control projector, auto curtain, light, volume, AV devices (DVD, VCR), signal switch function and so

on. It is much easier to operate with mode control and programmable editing system.

Suitable for Conference Room, Schools, Enterprise Training, etc.
asy to operate and simple to setup.
 
 

 

 

Features
VGA / Video / Audio Matrix switch function
 
Projector / Screen / Light Control function
 
DVD / VCR / TV / Projector IR Control
   
Class Mode Editor & Total Control
 
Functions
Programmable editing system, uses Sensor Panel to operate. Easy to use.
With Power Save Mode, the system and projector will go to low-power consumption mode during idle time.
With password protection and setting, unauthorized personnel or user cannot start the system.
With AV, VGA, AUDIO matrix switch function.
4 IR output and 1 IR learning input. Capable to connect 4 IR devices (for example DVD and VCR).
8 Relay I/O contacts. Capable to control auto-screen, curtain and lights.
4 AV inputs, 2 AV outputs; capable to connect AV devices like DVD, VCR, and AMP.

3 VGA inputs, 2 VGA outputs; capable to connect PC, Laptop, visualize projector to input; monitor and projector to output.

2 microphone inputs, with programmable volume control, mute and audio source remix function.
2 Audio Line In; capable to connect PC audio, Laptop audio, correlative to VGA switch.
4 RS-232 control port, capable to receive RS485 and RS422 commands.
Multiplex control in standard 1U rack. Suitable for rack case tower.
 
System Schematic

 
Sensor Panel MCS-400A

 
Feature
With Load Cell Sensor, reinforced acrylic Sensor Panel, and LED iconic function keys.
With LCD monitor, showing the current function and operation modes.
3 Scenarios for "White Board", "Class Begin" and "Class Over", or the user can edit the program to write new scenarios.
Multiple AV sources: PC/ Laptop/ Visualize projector/ DVD/ VCR/ TV/ AUX; for preview or project.
With projector control function, capable to control Power ON/ OFF, black screen and AV source switch.
With screen/ curtain control, capable to control UP/ STOP/ DOWN or OPEN/ STOP/ CLOSE.
With 6 keys to control environment devices, such as lights.
With volume control function, capable to control Mic. 1/ Mic. 2/ device/ overall volume, and mute or half volume.
With remote control function, capable to remote control DVD, VCR, TV, AUX, and its function such as PALY,STOP, REC, Power ON/ OFF, etc.
Setting and save change through the Sensor Panel.

 

Projector Extender MCS-210A
 

Feature

1 CAT.5(RJ-45) input, connects to Central Controller MCS-310A.
1 CAT.5(RJ-45) output, connects to another projector extender.
1 VGA output, connects to projector VGA IN.
1 RS-232 port, connects to RS-232 series control port.
1 Composite Video Out, connects to projector Video IN.
1 CAT.5 cable transmits Video signal (VGA & Video) and command (RS-232) to projector.
VGA, Video, RS-232 transmit in differential way, maximum length 30 meter.
 

 

2006
Sinew Technology Co., Ltd. All Rights Reserved.